SOLVOIL CO -- PAINT THINNER  -- 8010-00N036660
<pre>=====================  Product Identification  =====================

Product ID:PAINT THINNER
MSDS Date:10/24/1991
FSC:8010
NIIN:00N036660
=== Responsible Party ===
Company Name:SOLVOIL CO
Address:3111 DEPOT RD
City:HAYWARD
State:CA
ZIP:94545
Country:US
Info Phone Num:415-782-2040
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:SLVIL
=== Contractor Identification ===
Company Name:SOLVOIL CO
Address:3111 DEPOT RD
Box:City:HAYWARD
State:CA
ZIP:94545
Country:US
Phone:800-424-9300 (CHEMTREC)
CAGE:SLVIL

=============  Composition/Information on Ingredients  =============

Ingred Name:ING 13: LUNG DAMAGE. IF DROWSY/UNCON, PLACE ON LEFT SIDE
    W/HEAD DOWN. IF POSS, DO NOT LEAVE VICTIM UNATTENDED. SEEK MD.
RTECS #:9999999ZZ

Ingred Name:VENT:SECTION, ADDNL VENT OR EXHST SYSTEMS MAY BE REQD.
    WHERE EXPLOS MIX MAY BE PRESENT, ELEC SYS SAFE FOR SUCH (ING 16)
RTECS #:9999999ZZ

Ingred Name:ING 16:LOCATIONS MUST BE USED.
RTECS #:9999999ZZ

Ingred Name:NAPHTHOL SPIRITS. PEL & TLV AS STODDARD SOLVENT
CAS:64742-48-9
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

Ingred Name:SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (SUPER HIGH
    FLASH NAPHTHA)
CAS:64742-95-6
RTECS #:WF3400000

Ingred Name:XYLENE (SARA III). % (WT):0.02-0.05
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: SEE ING
OSHA PEL:100 PPM;150 PPM STEL
ACGIH TLV:100 PPM;150 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:BENZENE, TRIMETHYL-(MIXED ISOMERS); (TRIMETHYLBENZENES) 
    (SARA III)
CAS:25551-13-7
RTECS #:DC3220000
OSHA PEL:25 PPM
ACGIH TLV:25 PPM

Ingred Name:BENZENE, 1,2,4-TRIMETHYL-; (1,2,4-TRIMETHYLBENZENE)  (SARA
    III). % (WT):0.24-0.29
CAS:95-63-6
RTECS #:DC3325000
Fraction by Wt: SEE ING
OSHA PEL:N/K 
ACGIH TLV:25 PPM

Ingred Name:CUMENE  (SARA III). % (WT):0.01-0.04
CAS:98-82-8
RTECS #:GR8575000
Fraction by Wt: SEE ING
OSHA PEL:50 PPM, S
ACGIH TLV:50 PPM, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:EFTS OF OVEREXP:DROW/DIZZ/LOSS OF COORD/FATIGUE). ASPIR
    HAZ:ONE/MORE COMPONENTS OF MATL CAN ENTER LUNGS DURING (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7: SWALLOWING/VOM & CAUSE LUNG INFLAMM/DAM.
    COMMENTS:XYLENE, A COMPONENT OF PROD, CAUSES HARM TO FETUS IN (ING
    9)
RTECS #:9999999ZZ
Other REC Limits:N/KL

Ingred Name:ING 8:LAB ANIMAL STUDIES. RPTS HAVE ASSOC RPTD/PRLNGD OCCUP
    OVEREXPOS TO SOLV W/PERM BRAIN & NERV SYS DAM (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: (SOMETIMES REFERRED TO AS SOLV/PAINTERS' SYNDROME).
    INTENTIONAL MISUSE BY DELIB CONCENTRATING/INHALING (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10:CONTENTS MAY BE HARMFUL OR FATAL.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC:IMMED BEGIN ARTF RESP. IF BRTHG DFCLTIES
    DEVELOP, O*2 SHOULD BE ADMIN BY QUALIFIED PERS. SEEK MD (ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12: IMMED. INGEST:ASPIR HAZ. DO NOT INDUCE VOM OR GIVE
    ANYTHING BY MOUTH; MATL CAN ENTER LUNGS & CAUSE SEV (ING 14)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE:MATL MAY CAUSE MILD IRRIT. DIRECT
    CONT W/LIQ OR EXPOS TO VAPS/MISTS MAY CAUSE
    STINGING/TEARING/REDNESS. SKIN:ONE/MORE COMPONENTS OF MATL MAY
    CAUSE MILD IRRIT. PRLNGD/RPTD CONT MAY CAUSE REDNESS/BU
    RNING/DRYING/CRACKING. NO HARMFUL EFTS ARE EXPECTED FROM SKIN
    ABSORP OF MATL. INHAL:MATL IS EXPECTED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:TO HAVE LOW DEGREE OF TOX. BRTHG HIGH
    CONC OF VAPS/MISTS MAY CAUSE IRRIT OF NOSE/THROAT & SIGNS OF NERV
    SYS DEPRESS (E.G. HDCH/DROW/DIZZ/LOSS OF COORD/FATIGUE).
    INGEST:WHILE MATL HAS LOW DEGR EE OF TOX, INGEST OF EXCESSIVE QTYS
    MAYCAUSE IRRIT OF DIGESTIVE TRACT & SIGNS OF NERV SYS DEPRESS (E.G.
    HDCH/ (ING 7)
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS MAY BE
    MORE SUSCEPTIBLE TO EFTS OF MATL & RESP SYMPS ASSOC W/PRE-EXISTING
    LUNG DISORDERS (ASTHMA-LIKE CNDTNS) MAY BE AGGRAVATED BY EXPOS TO
    MATL.

=======================  First Aid Measures  =======================

First Aid:EYE:IF IRRIT/REDNESS DEVELOPS, MOVE FROM EXPOS & INTO FRESH
    AIR. FLUSH W/CLEAN WATER FOR AT LEAST 15 MINS. IF SYMPS PERSIST,
    SEEK MD. SKIN:REMOVE CONTAMD SHOES/CLTHG & CLEANSE AFFECTED AREAS
    THORO BY  WASHING W/MILD SOAP & WATER. IF IRRIT/REDNESS
    DEVELOPS/PERSISTS, SEEK MD. INHAL:IF RESP SYMPS DEVELOP, MOVE FROM
    SOURCE OF EXPOS & INTO FRESH AIR. IF SYMPS PERSIST, SEEK MD. IF NOT
    BRTHG, (ING 12)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:0.5
Upper Limits:6
Extinguishing Media:EXTINGUISH W/DRY CHEMICAL, CARBON DIOXIDE OR A
    UNIVERSAL TYPE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . STOP SPILL/RELS IF IT CAN BE DONE W/OUT RISK. MOVE UNDAMAGED
    CONTRS FROM FIRE AREA. WATER SPRAY (SUP DAT)
Unusual Fire/Explosion Hazard:MATL IS COMBUST & MAY BE IGNITED BY
    HEAT/SPARKS/FLAMES/OTHER SOURCES OF IGNIT (E.G. STATIC ELEC/PILOT
    LIGHTS & MECH/ELEC EQUIP). MAY CREATE VAP/AIR (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP ALL SOURCES OF IGNIT FROM SPILL & STAY
    UPWIND. STOP SPILL W/OUT RISK. WEAR APPROP PROT EQUIP INCL
    NIOSH/MSHA APPRVD RESP PROT. PVNT ENTRY INTO SEWERS/STORM
    DRAINS/NATURAL WATERWAYS. DIKE SPILL. U SE ABSORB MATL. NOTIFY NRC
    IF EPA RQ ISEXCEEDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTRS TIGHTLY CLSD/COOL/DRY/AWAY
    FROM SOURCES OF IGNIT. USE/STORE W/ADEQ VENT. AVOID INHAL OF VAPORS
    & PERSONAL CONTACT W/PRODUCT.
Other Precautions:BOND/GROUND EQUIP WHEN TRANSFERRING TO ANOTHER CONTR.
    EMPTY CONTRS RETAIN RESIDUE (LIQ/VAPOR) & CAN BE DANGEROUS. THEY
    MAY EXPLODE IN CONTACT W/IGNIT SOURCES & CAUSE INJURY/DEATH. REFER
    TO ANSI Z49.1  FOR TANK OPERATIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT IS ADVISED WHEN CONC
    EXCEEDS ESTABLISHED EXPOS LIMITS (SEE INGRED SECTION). DEPENDING ON
    AIRBORNE CONC, USE A NIOSH/MSHA APPRVD RESP OR GAS MASK W/APPROP
    CARTRIDGES & CANIS TER OR SUPPLIED AIR EQUIP.
Ventilation:IF CURRENT VENT PRACTICES ARE NOT ADEQ TO MAINTAIN AIRBORNE
    CONC BELOW ESTABLISHED EXPOS LIMITS (SEE INGRED (ING 15)
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:A SOURCE OF CLEAN WATER SHOULD BE AVAIL IN
    WORK AREA FOR FLUSHING EYES/SKIN. IMPERVIOUS CLTHG SHOULD BE WORN
    AS NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:MAY BE USEFUL IN MINIMIZING/DISPERSING VAPS & COOLING
    EQUIP EXPOSED TO HEAT/FLAME. AVOID SPREADING BURNING LIQ W/WATER
    USED FOR COOLING PURPOSES. EXPLO HAZ:EXPLOS HAZ IF HEATED. VAPS A
    RE HVR THAN AIR & MAY ACCUM IN LOW AREAS. IF CONTR IS NOT PROPERLY
    COOLED, IT MAY EXPLODE IN HEAT OF FIRE.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:313F,156C
Vapor Pres:2.9
Vapor Density:4.89
Spec Gravity:0.773 @ 60F
Evaporation Rate &amp; Reference:0.21
Solubility in Water:0.1%
Appearance and Odor:CLEAR, LITTLE IF ANY COLOR WITH CHARACTERISTIC
    ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES, OXIDIZING AGENTS & SELECTED AMINES.
Stability Condition to Avoid:PRODUCT FORMS COMBUSTIBLE &/OR EXPLOSIVE
    MIXTURES W/AIR &/OR OXYGEN.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
    OF AIR MAY YIELD CARBON MONOXIDE &/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE W/LOCAL,
    COUNTY, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.