CHEVRON -- CUSTOM MOTOR OIL SAE 10W 40,CPS220108  -- 9150-00N017453
<pre>=====================  Product Identification  =====================

Product ID:CUSTOM MOTOR OIL SAE 10W 40,CPS220108
MSDS Date:01/25/1990
FSC:9150
NIIN:00N017453
=== Responsible Party ===
Company Name:CHEVRON
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Info Phone Num:800-582-3825
Emergency Phone Num:800-457-2022
CAGE:0AHD1
=== Contractor Identification ===
Company Name:CHEVRON ENVIRONMENTAL HEALTH CENTER INC
Address:15299 SAN PABLO AVE
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Phone:800-582-3835
CAGE:0AHD1
Company Name:CHEVRON PRODUCTS COMPANY LUBRICANTS AND SPECIALTY PRODUCTS
Address:6001 BOLLINGER CANYON RD
Box:City:SAN RAMON
State:CA
ZIP:94583
Country:US
Phone:800-414-6737 / 800-582-3835
CAGE:81230

=============  Composition/Information on Ingredients  =============

Ingred Name:LUBRICATING BASES OIL
Fraction by Wt: >70%

Ingred Name:ADDITIVES AND OTHER INGREDIENTS
Fraction by Wt: <30%

Ingred Name:ZINC ALKYL DITHIOPHOSPHATE
CAS:68649-42-3
Fraction by Wt: <2%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: THIS SUBSTANCE IS NOT
    EXPECTED TO CAUSE PRLNGD/SIGNIFICANT IRRITATION. INHAL/INGEST: THE
    SYSTEMIC TOXICITY OF THIS SUBSTANCE HAS NOT BEEN DETERMINED.
    HOWEVER, IT SHOULD BE PRACTICALLY NON-TO XIC TO INTERNAL ORGANS IF
    INHALED OR INGESTED. THIS HAZARD EVALUATION IS BASED ON DATA FROM
    SIMILAR MATERIALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: NO FIRST AID REQD. AS A PREC FLUSH W/FRESH H*2O FOR AT
    LST 15 MIN. REMOVE CONTACT LENSES. SKIN: NO FIRST AID REQD. AS
    PREC, WASH SKIN THORO W/SOAP & WATER. REMOVE & WASH CONTAMD
    CLOTHING. INHAL:  IF DISCOMFORT/IRRIT OCCURS, MOVE PERSON TO FRESH
    AIR. SEE MD IF DISCOMFORT/IRRIT CONTINUES. INGEST: SHOULD BE ALMOST
    NON-TOX TO INTERNAL ORGANS. GET MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:401F,205C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM & WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP SOURCE OF LEAK/RELS.CLEAN UP AS SOON AS
    POSS.CNTN LIQ TO PRVNT FURTHER CONTAM OF SOIL, SURF H*2O OR
    GROUNDWATER.CLEAN SM SPILLS USING APPROP TECHNIQUES SUCH AS SORBENT
    MATLS/PUMPING.REMOVE CONTAM D SOIL.FOLLOW PROC FOR RPTG /RESPOND
    TOLG SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER. RESIDUE MAY
    IGNITE WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. CAUTION! DO
    NOT USE PRESSURE TO EMPTY DRUM OR EXPLOSION MAY RESULT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL RESP PROTECTION NORMALLY REQUIRED.
    HOWEVER, IF OPERATING CONDITIONS CREATE AIRBORNE CONCENTRATION
    WHICH EXCEED RECOMMENDED EXPOSURE STANDARDS, USE A NIOSH/MSHA
    APPROVED RESPIRATOR.
Ventilation:USE ADEQUATE VENTILATION TO KEEP AIRBORNE CONCENTRATIONS OF
    THIS MATERIAL BELOW RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AVOID PRLNGD OR FREQUENTLY RPTD SKIN CONTACT
    WITH THIS MATERIAL. SKIN CONTACT CAN BE MINIMIZED BY WEARING PROT
    CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.89
Solubility in Water:INSOLUBLE.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
    PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CO*2, H*2O VAPOR
    & MAY PRODUCE SO*X, NO*X, AND PO*X. INCOMPLETE COMBUSTION CAN
    PRODUCE CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE CONTAMINATED MATERIAL IN DISPOSABLE
    CONTAINERS/DISPOSE OF IN MANNER CONSISTANT W/APPLICABLE REGS.
    CONTACT LOCAL ENVIRONMENTAL OR HEALTH AUTHORITIES FOR APPROVED
    DISPOSAL OF THIS MATERIAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.