SIGMA CHEMICAL CO -- POTASSIUM HYDROXIDE PELLETS, 60369 -- 6810-00N085045
===================== Product Identification ===================== Product ID:POTASSIUM HYDROXIDE PELLETS, 60369 MSDS Date:07/31/1996 FSC:6810 NIIN:00N085045 === Responsible Party === Company Name:SIGMA CHEMICAL CO Box:14508 City:ST LOUIS State:MO ZIP:63178 Country:US Info Phone Num:314-771-5765 Emergency Phone Num:314-771-5765 CAGE:21076 === Contractor Identification === Company Name:SIGMA CHEMICAL COMPANY Address:3050 SPRUCE ST Box:14508 City:ST LOUIS State:MO ZIP:63178 Country:US Phone:314-771-5765 CAGE:21076 ============= Composition/Information on Ingredients ============= Ingred Name:POTASSIUM HYDROXIDE (CERCLA) CAS:1310-58-3 RTECS #:TT2100000 Fraction by Wt: 100% OSHA PEL:2 MG/M3, C ACGIH TLV:2 MG/M3, C EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== LD50 LC50 Mixture:LD50:(ORAL,RAT) 273 MG/KG. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE:HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE OF MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT, EYES AND SKIN. INHALATION MAY BE FATAL AS RES ULT OF SPASM, INFLAMMATION AND EDEMA OFTHE LARYNX AND BRONCHI, CHEMICAL PNEUMONITIS & PULMONARY EDEMA.(EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:HLTH HAZ:SYMPTOMS OF EXPOSURE MAY INCLUDE BURNING SENSATION, COUGHING, WHEEZING, LARYNGITIS, SHORTNESS OF BREATH, HEADACHE, NAUSEA & VOMITING. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES:IMMED FLUSH W/COPIOUS AMTS OF WATER FOR AT LST 15 MINS. ASSURE ADEQ FLUSHING BY SEPARATING LIDS W/FINGERS. SKIN:IMMED FLUSH W/COPIOUS AMTS OF WATER FOR AT LST 15 MINS WHILE REMOVING CONTAM CLTHG & SHOES. DISCARD CONTAM CLTHG & SHOES. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYG. INGEST:WASH OUT MOUTH W/WATER PROVIDED PERS IS CONSCIOUS. CALL MD IMMED. ===================== Fire Fighting Measures ===================== Extinguishing Media:NONCOMBUSTIBLE. USE EXTINGUISHING MEDIA APPROPRIATE TO SURROUNDING FIRE CONDITIONS. DO NOT USE WATER. Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . REACTS VIOLENTLY W/WATER. Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS. DANGER:UNDER FIRE CONDITIONS MATERIAL WILL MELT & FLOW. ================== Accidental Release Measures ================== Spill Release Procedures:EVACUATE AREA. WEAR NIOSH APPROVED SCBA, RUBBER BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE AFTER MATERIAL PIC KUP IS COMPLETE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN, ON CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE. TOXIC. KEEP TIGHTLY CLOSED. Other Precautions:DO NOT ALLOW CONTACT W/WATER. STORE IN COOL, DRY PLACE. CORROSIVE. CAUSES BURNS. HARMFUL BY INHAL, IN CONT W/SKIN & IF SWALLOWED. REACTS VIOLENTLY W/WATER. IN CASE OF ACCIDENT/IF YOU FEEL UNWELL, SEEK MED ADVICE IMMED (SHOW LBL WHERE POSS). ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR APPROPRIATE NIOSH APPROVED RESPIRATOR. Ventilation:USE ONLY IN A CHEMICAL FUME HOOD. Protective Gloves:CHEMICAL-RESISTANT GLOVES. Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES AND FULL LENGTH FACESHIELD . Other Protective Equipment:ANSI APPROVED EYE WASH FOUNTAIN & DELUGE SHOWER . WEAR OTHER SUITABLE PROTECTIVE CLOTHING. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. TAKE OFF IMMEDIATELY ALL CONTAMINATED CLOTHING. Supplemental Safety and Health MATLS TO AVOID: WITH ALUMINUM, TIN, ZINC & THEIR ALLOYS TO GENERATE FLAMMABLE & EXPLOSIVE HYDROGEN GAS. POTASSIUM HYDROXIDE REACTS WITH TRICHLOROETHYLENE TO FORM SPONTANEOUS FLAMMABLE DICHLOROACETYLEN E. ================== Physical/Chemical Properties ================== Melt/Freeze Pt:M.P/F.P Text:682F,361C Vapor Pres:1 @ 719C Spec Gravity:2.044 Appearance and Odor:SOLID. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES ACIDS, ALUMINUM, HALOGENS, NITRO CMPDS, ORG MATLS, ACID CHLORIDES, ACID ANHYDRIDES, MAGNESIUM, COPPER, TIN, ZINC. REACTS VIOLENTLY W/WATER. GENERATES FLAMM &/EXPLO HYDROGEN GAS IN CONT W/METALS MOLTEN MATL REACTS VIOLENTLY Stability Condition to Avoid:DO NOT HEAT ABOVE MELTING POINT. PROTECT FROM MOISTURE. ABSORBS CO*2 FROM AIR. Hazardous Decomposition Products:HYDROGEN GAS. ==================== Disposal Considerations ==================== Waste Disposal Methods:CONTACT A LICENSED PROFESSIONAL WASTE DISPOSAL SERVICE TO DISPOSE OF THIS MATERIAL. OBSERVE ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.