HILLYARD INC -- FINISH, FLOOR NON BUFFING  -- 7930-01-183-8584
<pre>=====================  Product Identification  =====================

Product ID:FINISH, FLOOR NON BUFFING
MSDS Date:06/09/1992
FSC:7930
NIIN:01-183-8584
=== Responsible Party ===
Company Name:HILLYARD INC
Address:302 N 4TH
City:ST JOSEPH
State:MO
ZIP:64502
Country:US
Info Phone Num:800-424-9300 (CHEMTREC)
Emergency Phone Num:816-233-1321 EXT 303
CAGE:28745
=== Contractor Identification ===
Company Name:HILLYARD INDUSTRIES
Address:302 NORTH FOURTH STREET
Box:City:ST JOSEPH
State:MO
ZIP:64501
Country:US
Phone:816-233-1321 (EXT 2303)
CAGE:28745

=============  Composition/Information on Ingredients  =============

Ingred Name:DIETHYLENE GLYCOL MONOMETHYL ETHER (SARA III)
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED

Ingred Name:VOC: 0.4 LBS/GAL; 52.2 GRAMS/LITER
RTECS #:9999999VO
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE.	CHRONIC: NONE.
Effects of Overexposure:NONE KNOWN
Medical Cond Aggravated by Exposure:NONE KNOWN

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:MATERIAL MAY SPATTER IF TEMPERATURE
    EXCEEDS BOILING POINT. POLYMER FILM CAN BURN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PICK UP WITH MOP OR WET VAC AND WASH AWAY WITH
    WATER.
Neutralizing Agent:NOT REQUIRED

======================	Handling and Storage  ======================

Handling and Storage Precautions:FREEZING OF PRODUCT MAY RUPTURE
    CONTAINER. PRODUCT SHELF LIFE IS BEST RETAINED BY STORAGE AT 45 TO
    100F TEMPERATURE.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER NORMAL USE
    CONDITIONS.
Ventilation:MECHANICAL FOR NORMAL USE.
Protective Gloves:NONE REQUIRED FOR NORMAL USE
Eye Protection:NO SPECIAL REQUIREMENTS UNDER NORMAL USE
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:211F,99C
Melt/Freeze Pt:M.P/F.P Text:27.0F,-2.8C
Vapor Pres:20.7 MM
Vapor Density:0.9
Spec Gravity:1.02 @ 25C
pH:8.0
Viscosity:GARDNR A5FAST
Evaporation Rate &amp; Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:CREAMY WHITE EMULSION; NONOBJECTIONABLE ODOR
Percent Volatiles by Volume:81.8

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN TO HILLYARD INDUSTRIES, INC.
Hazardous Decomposition Products:NONE KNOWN TO HILLYARD INDUSTRIES,
    INC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASH SMALL QUANTITIES DOWN SEWER WITH LARGE
    AMOUNT OF WATER. KEEP SPILLS & CLEANING RUNOFFS OUT OF MUNICIPAL
    SEWERS & OPEN BODIES OF WATER. LARGE SPILL PICKUP:LANDFILL OR
    INCINERATE SOLIDS. DISPOSE OF  ACCORDING TO LOCAL, STATE, & FEDERAL
    REGULATIONS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.