TIFCO INDUSTRIES -- BRAKE-KLEEN, 8195 -- 6850-00N069595
===================== Product Identification ===================== Product ID:BRAKE-KLEEN, 8195 MSDS Date:08/16/1993 FSC:6850 NIIN:00N069595 === Responsible Party === Company Name:TIFCO INDUSTRIES Box:40277 City:HOUSTON State:TX ZIP:77240 Country:US Info Phone Num:713-469-4800 Emergency Phone Num:713-896-8188 CAGE:0BPN7 === Contractor Identification === Company Name:TIFCO INDUSTRIES Address:21400 HEMPSTEAD HWY Box:40277 City:HOUSTON State:TX ZIP:77240-0277 Country:US Phone:216-469-4800/800-255-4564 CAGE:0BPN7 ============= Composition/Information on Ingredients ============= Ingred Name:CARBON DIOXIDE CAS:124-38-9 RTECS #:FF6400000 OSHA PEL:5000 PPM ACGIH TLV:5000PPM/30000STEL Ingred Name:ETHYLENE, TETRACHLORIDE; (TETRACHLOROETHYLENE) (SARA 313) (CERCLA) CAS:127-18-4 RTECS #:KX3850000 OSHA PEL:100 PPM, Z-2 ACGIH TLV:25PPM/100STEL,A3 EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO Health Hazards Acute and Chronic:ACUTE:INHALATION:DIZZINESS, PROLONGED EXPOSURE MAY LEAD TO UNCONSCIOUSNESS. EYES:STRONG IRRITATION. SKIN:MAY CAUSE DEFATTING AND DRYING. Explanation of Carcinogenicity:TETRACHLOROETHYLENE:IARC MONOGRAPHS, SUPP, VOL 7, PG 355, 1987:GROUP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994:(SUP DAT) Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:EXCESSIVE EXPOSURE WILL AGGRAVATE RESPIRATORY, CARDIOVASCULAR OR PULMONARY ILLNESSES. ======================= First Aid Measures ======================= First Aid:INGESTION:CALL MD IMMEDIATELY . INHALATION:REMOVE TO FRESH AIR. EYES:FLUSH WITH RUNNING WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH SOAP AND WATER. IF IRRITATION PERSISTS CONTACT PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:NONE Extinguishing Media:CO*2. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE. EXPOSURE TO TEMPERATURES ABOVE 120F MAY CAUSE BURSTING. ================== Accidental Release Measures ================== Spill Release Procedures:MOP UP WITH RAG OR USE SOME ABSORBENT CLAY MATERIAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT USE OR STORE NEAR HEAT OR OPEN FLAMES. EXPOSURE TO TEMPERATURES ABOVE 120F MAY CAUSE BURSTING. Other Precautions:NOT APPLICABLE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . NONE. Ventilation:LOCAL EXHAUST:YES. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT) Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER . LONG SLEEVES AND LONG PANTS. Work Hygienic Practices:DO NOT SMOKE WHILE USING. WASH HANDS AFTER USE. Supplemental Safety and Health EXPLAN OF CARCIN:ANTICIPATED TO BE CARCINOGEN. ANIMAL:LIVER TUMORS. EYE PROT:AND FULL LENGTH FACESHIELD . ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:250F,121C Vapor Pres:13 Vapor Density:>1 Spec Gravity:1.0 (H*2O=1) Evaporation Rate & Reference:2.1 (BUTYL ACETATE=1) Solubility in Water:0% Appearance and Odor:CLEAR SPRAY, STRONG CHLORINATED SOLVENT ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES SOME PLASTICS. Stability Condition to Avoid:TEMPERATURES ABOVE 120F. Hazardous Decomposition Products:NONE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF RESIDUE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL GUIDELINES. DO NOT PUNCTURE OR INCINERATE CONTAINER. DO NOT REUSE CONTAINER. WRAP AND PLACE IN TRASH COLLECTION. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.