STATE CHEMICAL MANUFACTURING CO. -- GONE  -- 6850-00N010006
<pre>=====================  Product Identification  =====================

Product ID:GONE
MSDS Date:06/01/1986
FSC:6850
NIIN:00N010006
=== Responsible Party ===
Company Name:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
City:CLEVELAND
State:OH
ZIP:44114
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company Name:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIA  (SARA III)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:50 PPM
ACGIH TLV:25 PPM/35 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Ingred Name:SODIUM METASILICATE
CAS:6834-92-0
RTECS #:VV9275000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SODIUM PHOSPHATE, TRIBASIC	(SARA III)
CAS:7601-54-9
RTECS #:TC9490000
Fraction by Wt: <3%
Other REC Limits:N/K 
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:NITRILOTRIACETIC ACID,TRISODIUM SALT
CAS:5064-31-3
RTECS #:MB8400000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:YES    IARC:NO	 OSHA:NO
Health Hazards Acute and Chronic:NIOSH STUDIES INDICATE 2-BUTOXYETHANOL
    HAS CAUSED REPRODUCTIVE DISORDERS IN LABORATORY ANIMALS AND MAY
    HAVE THE POTENTIAL FOR CAUSING SIMILAR DISORDERS IN HUMANS .
Explanation of Carcinogenicity:NITRILOTRIACETIC ACID:SUSP HUM
    CARCIN,KNOWN ANIMAL CARCIN (NTP,1985).
Effects of Overexposure:EYES:DIRECT CONTACT WITH EYES MAY RESULT IN
    IRRITATION.SKIN:N/K .INGEST:DO NOT TAKE INTERNALLY.INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH EYES IMMEDIATELY WITH PLENTY OF COOL WATER FOR AT
    LEAST 15 MIN.GET MEDICAL ATTENTION.SKIN:WASH THOROUGHLY WITH SOAP
    AND WATER.IF IRRITATION DEVELOPS,CONTACT A PHYSICIAN.INGESTION:IF
    IRRITAT ION OR STOMACH UPSET OCCURS,CONTACT A PHYSICIAN OR POISON
    CONTROL CENTER.INHALATION:REMOVE TO FRESH AIR.IF IRRITATION OR
    DISCOMFORT CONTINUES,CONTACT A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:N/K 
Upper Limits:N/K 

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL ON OIL ABSORBANT,SAND,OR
    VERMICULITE.RINSE RESIDUE THOROUGHLY WITH WATER.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT REUSE EMPTY CONTAINERS FOR ANY
    PURPOSE.AVOID EYE CONTACT.AVOID BREATHING THE VAPORS OF THIS
    PRODUCT.
Other Precautions:READ AND FOLLOW ALL LABEL PRECAUTIONS BEFORE USING
    THIS PRODUCT.FOR INDUSTRIAL USE ONLY.KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .
Protective Gloves:RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K 
Work Hygienic Practices:N/K 
Supplemental Safety and Health
% VOLAT BY WT:80.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:195-225F
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:N/K 
Spec Gravity:1.073 (WATER=1)
pH:12.8
Evaporation Rate &amp; Reference:N/K 
Solubility in Water:COMPLETE
Appearance and Odor:A CLEAR BLUE LIQUID WITH A PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.MAY ATTACK SOME PLASTICS.
Stability Condition to Avoid:N/K 
Hazardous Decomposition Products:NONE EXPECTED.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT REUSE EMPTY
    CONTAINERS.FLUSH THOROUGHLY WITH WATER,CRUSH AND DISCARD,OR GIVE
    RINSED DRUMS TO A DRUM RECONDITIONER  FOR RECYCLING.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.