STIC-ADHESIVE PRODUCTS CO INC -- LATEX PAINT  -- 8010-00-055-5100
<pre>=====================  Product Identification  =====================

Product ID:LATEX PAINT
MSDS Date:01/01/1987
FSC:8010
NIIN:00-055-5100
=== Responsible Party ===
Company Name:STIC-ADHESIVE PRODUCTS CO INC
Address:3950 E MEDFORD ST
City:LOS ANGELES
State:CA
ZIP:90063
Country:US
Info Phone Num:213-268-2956
Emergency Phone Num:213-268-2956
CAGE:1BH90
=== Contractor Identification ===
Company Name:STIC-ADHESIVE PRODUCTS CO INC
Address:3950 MEDFORD ST
Box:City:LOS ANGELES
State:CA
ZIP:90063-1675
Country:US
CAGE:1BH90

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:UNKNOWN  Skin:UNKNOWN  Ingestion:YES
Health Hazards Acute and Chronic:SWALLOWING MAY CAUSE SOME NAUSEA.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING: GIVE 2 GLASSES OF WATER AND INDUCE VOMITING BY
    PUTTING FINGER DOWN THROAT. EYES & SKIN: FLUSH WITH WATER.
    INHALATION: NO EMERGENCY CARE ANTICIPATED.

=====================  Fire Fighting Measures  =====================

Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP WITH WATER BEFORE ALLOWING TO DRY
    OUT. SODIUM CHLORIDE OR CALCIUM CHLORIDE CAN ALSO BE SPRINKLED ON
    THE SPILL WHICH WILL COAGULATE THE LATEX AND FACILITATE CLEANING
    WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRODUCT SHOULD BE USED WITH ADEQUATE
    VENTILATION AND REMOVED FROM SKIN AS SOON AS PRACTICAL AFTER
    CONTACT. STORE MATERIAL BETWEEN 40 & 100F.
Other Precautions:IT SHOULD NOT BE SWALLOWED OR BE ALLOWED TO COME IN
    CONTACT WITH THE EYES. PIPELINES SHOULD REMAIN FILLED AT ALL TIMES,
    OR AFTER USE THOROUGHLY RINSED WITH WATER. STORAGE CONTAINERS
    SHOULD BE KEPT TIG HTLY CLOSED TO PREVENT SKINNING.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MECHANICAL (GENERAL): NORMAL
Protective Gloves:DESIRABLE, RUBBER OR PLASTIC
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:EYE BATH
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:1.4-1.42(WTR=1)
Evaporation Rate &amp; Reference:>1 (BU AC=1)
Solubility in Water:INFINITE
Appearance and Odor:OFF WHITE OPAQUE LIQUID; BLAND ODOR
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:WHEN WATER IS EVAPORATED, POLYMER CAN
    BURN AND PRODUCE CARBON MONOXIDE AND CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MAY BE DISPOSED OF IN ACCORDANCE WITH STANDARD
    PROCEDURES USED WITH LATEX PRODUCTS. BURY IN LANDFILL WHERE
    PERMITTED UNDER APPROPRIATE GOVERNMENT REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.